Graco
TexSpray
Texture Sprayers

Graco
TexSpray
Texture Sprayers

EnDiSys on Facebook EnDiSys on LinkedIN EnDiSys on YouTube EnDiSys on Twitter

Texture sprayers made to spray skim coat, drywall mud in an orange peel, splatter or knockdown finish, paints, and other heavy coatings.

When your job requires maximum productivity and versatility, turn to the all new TexSpray™ sprayers to get the job done—fast! Designed to save time and money by enabling you to spray more square footage in a day, these units offer valuable, musthave features for the serious professional contractor.

EnDiSys offers a complete line of contractor equipment.

Texture Sprayers Informational Brochure

TexSpray RTX 1400SI
17H572

TexSpray

Electric Texture Sprayer
The TexSpray RTX 1400SI provides the features you want with the finish you need.

The TexSpray RTX 1400SI is the everyday finishing solution designed for the Residential and Repaint Contractor looking for everyday reliability.

FEATURES & SPECIFICATIONS

RotoFlex II Pump

  • Features an innovative braided sling that provides extra support to the RotoFlex pump tube
  • 1.4 gpm output to get the job done quickly - job site proven!


  • High-Output Air Compressor

  • High-output design delivers 33% more air for demanding finishes
  • Maintenance-free design
  • Projects materials farther
  • 6.1 cfm output


  • 120v AC High-Output Electric Motor

  • Optimized design offers improved power and performance
  • Single-motor design operates both the air compressor and the RotoFlex pump


  • Skip-Bond Material/Air Hose

  • Both hoses are permanently bonded together for easy handling
  • Offers improved flexibility


  • FlexChange Pump Section

  • No-tools pump replacement system—now easier than ever!
  • Swap out a spare RotoFlex pump in seconds
  • Eliminate costly job site downtime


  • Adjustable Material Flow Control

  • Dial up to spray thicker matierals
  • Dial down for less flow and maximum control
  • Easy-to-read gauge


  • Lightweight Spray Gun

  • Durable, corrosion-resistant design
  • Easy-to-use air and trigger adjustment
  • Ergonomically styled for comfortable spraying

  • UNIT INCLUDES:

  • 3/4 in x 25 ft Material Hose
  • 3/8 in x 25 ft Air Hose
  • Lightweight Spray Gun
  • 3 mm, 4 mm, 6 mm, 8 mm Round Nozzles

  • SPECIFICATIONS:

  • MAX GPM (LPM): 1.4 (5.3)
  • MAX PSI (BAR): 70 (4.8)
  • CFM (CM) @ 20 PSI: 6.1 (.17)
  • HOPPER GAL (L): 10 (38)
  • MOTOR TYPE: AC
  • MOTOR HP: 1.7
  • VOLTAGE: 120V
  • MAX HOSE FT (M): 25 (7.5)
  • TexSpray RTX 2000PI
    17H573

    TexSpray

    Electric Texture Sprayer
    The TexSpray RTX 2000PI is designed for increased productivity to get you on and off the job site faster.

    The RTX 2000PI delivers an optimized texture system perfect for tradesmen and contractors seeking the time-saving features required for medium-to-large jobs.

    FEATURES & SPECIFICATIONS




    Large Capacity Hopper

  • Holds up to 13 gallons of materials for less time spent refilling


  • SmartStart System

  • Innovative system automatically starts pump and compressor when gun trigger is pulled, and shuts them off when released
  • Provides a soft-start to eliminate material blast that can impact finish
  • Reduces noise and vibration
  • Extends life of pump and compressor


  • WideTex Tips & Adapter

  • Allows spraying in a uniform fan pattern
  • Spray repeatable patterns with less material and pressure adjustment
  • Increases productivity by more than 20%


  • Heavy-Duty Aluminum Trigger Gun with Integrated Prime Selector

  • Durable aluminum design
  • Oversized fluid/air passages
  • Allows unit to be put in prime mode on the gun


  • RotoFlex II Pump

  • Features an innovative braided sling that provides extra support to the RotoFlex pump tube
  • 2.0 gpm output to get the job done quickly - job site proven!


  • High-Output Air Compressor

  • High-output design delivers 33% more air for demanding finishes
  • Maintenance-free design
  • Projects materials farther
  • 6.1 cfm output at 20 PSI


  • 120v AC High-Output Electric Motor

  • Optimized design offers improved power and performance
  • Single-motor design operates both the air compressor and the RotoFlex pump


  • 1 inch Skip-Bond Material/Air Hose

  • Both hoses are permanently bonded together for easy handling
  • Offers improved flexibility


  • FlexChange Pump Section

  • No-tools pump replacement system—now easier than ever!
  • Swap out a spare RotoFlex pump in seconds
  • Eliminate costly job site downtime


  • Adjustable Material Flow Control

  • Dial up to spray thicker matierals
  • Dial down for less flow and maximum control
  • Easy-to-read gauge

  • UNIT INCLUDES:



  • 1 in x 25 ft Material Hose
  • 3/8 in x 25 ft Air Hose
  • Heavy Duty Texture Gun
  • 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm Round Nozzles
  • WideTex Adapter with 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, XL W Tips

  • SPECIFICATIONS:


  • MAX GPM (LPM): 2.0 (7.6)
  • MAX PSI (BAR): 70 (4.8)
  • CFM (CM) @ 20 PSI: 6.1 (.17)
  • HOPPER GAL (L): 13 (49)
  • MOTOR TYPE: AC
  • MOTOR HP: 1.7
  • VOLTAGE: 120V
  • MAX HOSE FT (M): 50 (15.4)
  • TexSpray RTX 5000PI
    17H575

    TexSpray

    Electric Texture Sprayer
    The TexSpray RTX 5000PI is designed for increased productivity to get you on and off the job site even faster.

    The RTX 5000PI is an optimized texture system perfect for tradesmen and contractors seeking the time-saving features required for medium-to-large jobs. The RTX 5000PI delivers 5 gallons per minute and can handle up to 100 feet of hose to help get the job done faster..

    FEATURES & SPECIFICATIONS




    Extra Large Capacity Hopper

  • Holds up to 15 gallons of materials for less time spend refilling the hopper


  • 120V MaxPower Brushless DC Motor

  • Allows the trouble-free use of long extension cords with less circuit breaker issues
  • Totally enclosed, fan-cooled design protects the motor from dust, dirt and other debris
  • Brushless design means you never need to replace brushes
  • Run in high-output 20 amp mode or set to 15 amps for jobs with power limitations


  • SmartStart System

  • Innovative system automatically starts pump and compressor when gun trigger is pulled, and shuts them off when released
  • Provides a soft-start to eliminate material blast that can impact finish
  • Reduces noise and vibration
  • Extends life of pump and compressor


  • WideTex Tips & Adapter

  • Allows spraying in a uniform fan pattern
  • Spray repeatable patterns with less material and pressure adjustment
  • Increases productivity by more than 20%


  • Heavy-Duty Aluminum Trigger Gun with Integrated Prime Selector

  • Durable aluminum design
  • Oversized fluid/air passages
  • Allows unit to be put in prime mode on the gun


  • RotoFlex II Pump

  • Features an innovative braided sling that provides extra support to the RotoFlex pump tube
  • 5.0 gpm output to get the job done quickly - job site proven!


  • High-Output Twin-Cylinder Air Compressor

  • High-output design delivers 33% more air for demanding finishes
  • Maintenance-free design
  • Projects materials farther
  • Runs at a lower RPM for longer life
  • 8.6 cfm output at 20 PSI


  • 1 inch Skip-Bond Material/Air Hose

  • Both hoses are permanently bonded together for easy handling
  • Offers improved flexibility


  • FlexChange Pump Section

  • No-tools pump replacement system—now easier than ever!
  • Swap out a spare RotoFlex pump in seconds
  • Eliminate costly job site downtime


  • Adjustable Material Flow Control

  • Dial up to spray thicker matierals
  • Dial down for less flow and maximum control
  • Easy-to-read gauge

  • UNIT INCLUDES:


  • 1 in x 25 ft Material Hose
  • 3/8 in x 25 ft Air Hose
  • Heavy Duty Texture Gun
  • 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm Round Nozzles
  • WideTex Adapter with 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, XL W Tips

  • SPECIFICATIONS:


  • MAX GPM (LPM): 5.0 (19)
  • MAX PSI (BAR): 100 (6.9)
  • CFM (CM) @ 20 PSI: 8.6 (.24)
  • HOPPER GAL (L): 15 (57)
  • MOTOR TYPE: DC Brushless
  • MOTOR HP: 2.0
  • VOLTAGE: 120V
  • MAX HOSE FT (M): 100 (30)
  • TexSpray RTX 5000PX
    17H579

    TexSpray

    Electric Texture Sprayer
    The TexSpray RTX 5000PX is configured to tackle exterior jobs of all sizes with 120V power.

    The RTX 5000PX is ideal for the large residential and commercial contractor needing a compact yet powerful texture sprayer capable of handling a wide variety of materials, such as synthetic stuccos, deck coatings, stone paints and more.

    FEATURES & SPECIFICATIONS


    Extra Large Capacity Hopper

  • Holds up to 15 gallons of materials for less time spend refilling the hopper


  • 120V MaxPower Brushless DC Motor

  • Allows the trouble-free use of long extension cords with less circuit breaker issues
  • Totally enclosed, fan-cooled design protects the motor from dust, dirt and other debris
  • Brushless design means you never need to replace brushes
  • Run in high-output 20 amp mode or set to 15 amps for jobs with power limitations


  • SmartStart System

  • Innovative system automatically starts pump and compressor when gun trigger is pulled, and shuts them off when released
  • Provides a soft-start to eliminate material blast that can impact finish
  • Reduces noise and vibration
  • Extends life of pump and compressor


  • WideTex Tips & Adapter

  • Allows spraying in a uniform fan pattern
  • Spray repeatable patterns with less material and pressure adjustment
  • Increases productivity by more than 20%


  • Heavy-Duty Aluminum Trigger Gun with Integrated Prime Selector

  • Durable aluminum design
  • Oversized fluid/air passages
  • Allows unit to be put in prime mode on the gun


  • RotoFlex HD Pump

  • Features an innovative braided sling that provides extra support to the RotoFlex pump tube
  • 5.0 gpm output to get the job done quickly - job site proven!


  • High-Output Twin-Cylinder Air Compressor

  • High-output design delivers 33% more air for demanding finishes
  • Maintenance-free design
  • Projects materials farther
  • Runs at a lower RPM for longer life
  • 8.6 cfm output at 20 PSI


  • 1 1/4 inch Skip-Bond Material/Air Hose

  • Both hoses are permanently bonded together for easy handling
  • Offers improved flexibility


  • FlexChange Pump Section

  • No-tools pump replacement system—now easier than ever!
  • Swap out a spare RotoFlex pump in seconds
  • Eliminate costly job site downtime


  • Adjustable Material Flow Control

  • Dial up to spray thicker matierals
  • Dial down for less flow and maximum control
  • Easy-to-read gauge

  • UNIT INCLUDES:

  • 1 in x 25 ft Material Hose
  • 3/8 in x 25 ft Air Hose
  • Heavy Duty Texture Gun
  • 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm Round Nozzles
  • WideTex Adapter with 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, XL W Tips

  • SPECIFICATIONS:

  • MAX GPM (LPM): 5.0 (19)
  • MAX PSI (BAR): 100 (6.9)
  • CFM (CM) @ 20 PSI: 8.6 (.24)
  • HOPPER GAL (L): 15 (57)
  • MOTOR TYPE: DC Brushless
  • MOTOR HP: 2.0
  • VOLTAGE: 120V
  • MAX HOSE FT (M): 100 (30)
  • TexSpray RTX 5500PX
    17H581

    TexSpray

    Electric Texture Sprayer
    The TexSpray RTX 5500PX is configured to tackle exterior jobs of all sizes with 240V power.

    The RTX 5500PX is ideal for the large residential and commercial contractor needing a compact yet powerful texture sprayer capable of handling a wide variety of materials, such as synthetic stuccos, deck coatings, stone paints and more.

    FEATURES & SPECIFICATIONS


    Extra Large Capacity Hopper

  • Holds up to 15 gallons of materials for less time spend refilling the hopper


  • 120V MaxPower Brushless DC Motor

  • Allows the trouble-free use of long extension cords with less circuit breaker issues
  • Totally enclosed, fan-cooled design protects the motor from dust, dirt and other debris
  • Brushless design means you never need to replace brushes
  • Connects to standard 220-240 volt L6-30 receptacle (3-wire) on most distribution boxes or generators
  • Run in high-output 16 amp mode or set to 10 amps for jobs with power limitations


  • SmartStart System

  • Innovative system automatically starts pump and compressor when gun trigger is pulled, and shuts them off when released
  • Provides a soft-start to eliminate material blast that can impact finish
  • Reduces noise and vibration
  • Extends life of pump and compressor


  • WideTex Hardened Tips & Adapter

  • Allows spraying in a uniform fan pattern
  • Spray repeatable patterns with less material and pressure adjustment
  • Increases productivity by more than 20%


  • Heavy-Duty Aluminum Trigger Gun with Integrated Prime Selector

  • Durable aluminum design
  • Oversized fluid/air passages
  • Allows unit to be put in prime mode on the gun


  • RotoFlex HD Pump

  • Features an innovative braided sling that provides extra support to the RotoFlex pump tube
  • 5.5 gpm output to get the job done quickly - job site proven!


  • High-Output Twin-Cylinder Air Compressor

  • High-output design delivers 33% more air for demanding finishes
  • Maintenance-free design
  • Projects materials farther
  • Runs at a lower RPM for longer life
  • 9.1 cfm output at 20 PSI


  • 1 1/4 inch Skip-Bond Material/Air Hose

  • Both hoses are permanently bonded together for easy handling
  • Offers improved flexibility


  • FlexChange Pump Section

  • No-tools pump replacement system—now easier than ever!
  • Swap out a spare RotoFlex pump in seconds
  • Eliminate costly job site downtime


  • Adjustable Material Flow Control

  • Dial up to spray thicker matierals
  • Dial down for less flow and maximum control
  • Easy-to-read gauge

  • UNIT INCLUDES:

  • 1 in x 25 ft Material Hose
  • 3/8 in x 25 ft Air Hose
  • Heavy Duty Texture Gun
  • 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm Round Nozzles
  • WideTex Adapter with 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, XL W Tips

  • SPECIFICATIONS:

  • MAX GPM (LPM): 5.5 (21)
  • MAX PSI (BAR): 100 (6.9)
  • CFM (CM) @ 20 PSI: 9.1 (.26)
  • HOPPER GAL (L): 15 (57)
  • MOTOR TYPE: DC Brushless
  • MOTOR HP: 2.0
  • VOLTAGE: 240V
  • MAX HOSE FT (M): 100 (30)
  • TexSpray HTX 2030 Complete
    FreeFlo Inline Gun - 258740
    Trigger Gun Applicator - 278677

    TexSpray

    Gas-Powered Texture Sprayer
    Designed for today's demanding exterior aggregate and smooth coatings, the HTX 2030 offers extreme durability and simple opperation

    The all new TexSpray HTX 2030 is Graco’s most powerful and versatile texture sprayer to date. Capable of applying exterior smooth and aggregate textures, elastomerics, and acrylic materials, it can also spray drywall mud in an orange peel, splatter or knockdown finish. Combine this with the available MaxLife Endurance High Pressure Pump and you can spray a wide variety of interior and exterior smooth materials including primers and paints.

    FEATURES & SPECIFICATIONS


    High-Output Texture Pump - uniquely designed pump with extra large passages allows pumping aggregated materials up to 2.5 mm with delivery rates to 3.0 gpm at 1000 psi for time-saving production rates.

    Exclusive PowerFlo Control System - remotely stops and starts material flow right at the pump, eliminating the need for a downstream valve. Offers a smooth, controlled material flow to prevent pack-out conditions and ensures a soft start, eliminating the material blast that can impact finish quality.

    Exclusive StraightThru Fluid Path - eliminates turns and corners from pump to gun putting less stress on material to virtually eliminate pack-out conditions and enables the spraying of today’s more demanding and aggressive aggregate materials.

    Wide Variety of Applicators

  • NEW FreeFlo Inline Gun offers oversized, unobstructed fluid passages to provide maximum flow and sprays air-assisted in either a round pattern or wide fan pattern for fast, consistent material coverage.
  • NEW 3 ft Pole Gun* offers extended reach to minimize repositioning of lifts and ladders
  • Flex Head Pole Gun* offers greater control in tight areas, such as on scaffolding and around architectural detail
  • Both new Pole Guns can spray in a wide fan pattern – an industry first! *Sold Separately

  • UNIT INCLUDES:

  • High-Output Piston Texture Pump
  • FreeFlo Inline Gun
  • RAC X 671 Airless Tip and Guard
  • 3/4 in x 50 ft (19 mm x 15 m) Hose
  • 55 Gallon Suction Set
  • Fine Finish Kit with 1/8 in, 1/4 in, 5/16 in and 3/8 in Nozzles
  • 4 mm, 6 mm, 8 mm, 10 mm Nozzles

  • SPECIFICATIONS:

  • MAX GPM (LPM): 3.0 (11)
  • MAX PSI (BAR): 1000 (70)
  • MAX TIP SIZE: .071
  • ENGINE CC (HP): Honda 200 (6.5)
  • Graco TexSpray HTX 2030 Complete Plus+
    FreeFlo Inline Gun - 258741
    Trigger Gun Applicator - 278678

    TexSpray

    Gas-Powered Texture Sprayer
    Designed for today's demanding exterior aggregate and smooth coatings, the HTX 2030 offers extreme durability and simple opperation

    The all new TexSpray HTX 2030 is Graco’s most powerful and versatile texture sprayer to date. Capable of applying exterior smooth and aggregate textures, elastomerics, and acrylic materials, it can also spray drywall mud in an orange peel, splatter or knockdown finish. Combine this with the available MaxLife Endurance High Pressure Pump and you can spray a wide variety of interior and exterior smooth materials including primers and paints.

    FEATURES & SPECIFICATIONS

    High-Output Texture Pump - uniquely designed pump with extra large passages allows pumping aggregated materials up to 2.5 mm with delivery rates to 3.0 gpm at 1000 psi for time-saving production rates.

    Exclusive PowerFlo Control System - remotely stops and starts material flow right at the pump, eliminating the need for a downstream valve. Offers a smooth, controlled material flow to prevent pack-out conditions and ensures a soft start, eliminating the material blast that can impact finish quality.

    Exclusive StraightThru Fluid Path - eliminates turns and corners from pump to gun putting less stress on material to virtually eliminate pack-out conditions and enables the spraying of today’s more demanding and aggressive aggregate materials.

    Wide Variety of Applicators

  • NEW FreeFlo Inline Gun offers oversized, unobstructed fluid passages to provide maximum flow and sprays air-assisted in either a round pattern or wide fan pattern for fast, consistent material coverage.
  • NEW 3 ft Pole Gun* offers extended reach to minimize repositioning of lifts and ladders
  • Flex Head Pole Gun* offers greater control in tight areas, such as on scaffolding and around architectural detail
  • Both new Pole Guns can spray in a wide fan pattern – an industry first! *Sold Separately

  • UNIT INCLUDES:

  • High-Output Piston Texture Pump
  • FreeFlo Inline Gun
  • RAC X 671 Airless Tip and Guard
  • 3/4 in x 50 ft (19 mm x 15 m) Hose
  • 55 Gallon Suction Set
  • Fine Finish Kit with 1/8 in, 1/4 in, 5/16 in and 3/8 in Nozzles
  • 4 mm, 6 mm, 8 mm, 10 mm Nozzles
  • PLUS+ INCLUDES
    All the parts of the HTX 2030 Complete
    PLUS


    • MaxLife Endurance High Pressure Airless Pump
    • Heavy-Duty Texture Gun
    • RAC X 643 Airless Tip and Guard
    • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
    • 1/4 in x 3 ft (6.4 mm x .9 m) Whip Hose

    • SPECIFICATIONS:


    • MAX GPM (LPM): 3.0 (11)
    • MAX PSI (BAR): 1000 (70)
    • MAX TIP SIZE: .071
    • ENGINE CC (HP): Honda 200 (6.5)

    TexSpray GTX 2000EX
    257030

    TexSpray

    Pumping System for Texture Spraying
    The ideal pumping system for the professional texture contractor who has access to a high-output air compressor

    With its unmatched performance and durability, The GTX 2000ex can easily apply common interior drywall mud finishes such as orange peel, splatter and knockdown, or the more demanding deck coatings and exterior aggregate acrylic and elastomeric finishes.

    FEATURES & SPECIFICATIONS

    Versatile Pump-Only Texture Sprayer - Allows your compressor to be placed outside while completing interior projects. Designed for use with a user-supplied air compressor*

    Husky™ 1040 Double Diaphragm Pump - High-output, 1-in (25 cm) pump produces texture delivery rates to 4.0 gpm* and features durable Geolast™ Ball Check Valves

    Separate Pump and Gun Air Controls - One regulator controls pump pressure and output, another controls atomization air enables you to produce precise, consistent and repeatable texture finishes

    Heavy-Duty Air Spray Trigger Gun - Durable cast aluminum design has oversized fluid passages for pumping heavy mud mixes and extra-course gun head threads for quick nozzle changes

    Large Capacity 17-gallon (64 L) Hopper - features steep sides to keep the thickest muds flowing to the pump and no-tools removal for easy cleanup

    Bonded Material/Air Hose - Both hoses are permanently bonded together for easy handling with no-tools hose connection

    On-Board Air Filtration System - Filters incoming air to keep your sprayer running at optimal performance with Auto-drain design to automatically remove moisture build-up

    UNIT INCLUDES:

  • Heavy-Duty Air Spray Trigger Gun
  • 6 Nozzles (3, 4, 6, 8, 10, 12 mm)
  • 1 in x 25 ft (25.4 mm x 7.5m) Bonded Air/Material Hose

  • SPECIFICATIONS:

  • MAX GPM (LPM): 4.0 (15.1)
  • MAX PSI (BAR): 120 (8.3)
  • MAX HOSE FT (M): 100 (30)
  • HOPPER GAL (L): 17 (64.3)
  • *Air compressor with minimum performance of 12 CFM at 100 psi (340 LPM at 6.9 BAR) recommended. †Hose length is dependent on material viscosity.

    TexSpray President 10:1
    954088 - Bare

    TexSpray

    President 10:1 Ratio Air Spray System Instructions - Parts List

    Air-Operated Texture Sprayer
    The 10:1 President is a time-tested, air-operated texture sprayer that pumps directly from your material drum.

    FEATURES & SPECIFICATIONS

    High-Output Piston Pump

  • Submerged foot valve is placed low to the ground to ensure the pump is preloaded with material
  • Available in both carbon steel and stainless steel
  • High-output pump produces texture delivery rates to 3.0 gpm (11 lpm) at 1000 psi (69 bar) for time-saving production ratios


  • Heavy-Duty Graco Air Motor

  • Time-tested air motor delivers years of reliable, dependable operation
  • Simple, maintenance-free design

  • UNIT INCLUDES:

    225886 Carbon Steel Complete

  • Heavy-Duty Air Spray Gun
  • 6 mm Nozzle
  • 3/8 in x 25 ft (9.5 mm x 7.5 m) Air Hose
  • 3/4 in x 25 ft (19 mm x 7.5 m) Air Hose
  • 3/4 in x 25 ft (19 mm x 7.5 m) High Pressure Material Hose


  • 225877 Carbon Steel Complete & 987429 SST Complete

  • Heavy-Duty Air Spray Gun
  • 6 mm Nozzle
  • 3/8 in x 100 ft (9.5 mm x 30 m) Air Hose
  • 3/4 in x 25 ft (19 mm x 7.5 m) Air Hose
  • 3/4 in x 50 ft (19 mm x 15 m) High Pressure Material Hose

  • SPECIFICATIONS:

  • MAX GPM (LPM): 3.0 (11)
  • MAX PSI (BAR): 1000 (70)
  • MAX HOSE FT (M): 200 (61)
  • TexSpray Mark IV
    16W897 Standard
    16W898 ProContractor

    TexSpray

    Electric Airless Texture Sprayer
    The “little brother” of the Mark V texture sprayer, with must-have features for the professional contractor

    Texture spraying is all about high productivity, and that’s where the Mark IV sprayer really delivers. Designed to save time and money by enabling you to spray more square footage in a day, this unit offers valuable, musthave features for the serious professional contractor. Whether you need to spray skim coat in a Level 5 finish, drywall mud in an orange peel, splatter or knockdown finish or even the wide range of primers and paint, this sprayer can do it all!

    FEATURES & SPECIFICATIONS


    The Standard Series:

    MaxPower Brushless DC Motor – Never change brushes with this maintenance-free, totally enclosed motor.



    Advantage Drive System – Runs quiet and has a lifetime guarantee.



    SmartControl 3.0 Pressure Control – Delivers consistent spray fan without pressure fluctuations at all spraying pressures, and includes ProGuard technology.



    Endurance Pump with Max Flo+ – Amazingly durable and easy-to-service design means less downtime on the job.



    Rugged Cart Design – Chrome over steel makes this durable cart last for years.



    Ceramic and Stainless Steel Ball Sets – Provides maximum versatility no matter what you’re spraying.



    Easy Out Pump Filter – Spill less material when removing the filter element.



    Heavy-Duty Prime Valve – Maintenance-free design withstands high pressure dumping.



    The ProContractor Series:

    QuikReel – Deploy and rewind up to 300 ft of hose in seconds without twists or coils.



    LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.



    WatchDog Pump Protection System – Saves the pump from damage when paint or texture material runs out or a hose breaks.



    ProConnect 2 Pump Removal System – Change out the pump using no tools in seconds resulting in quickly getting back to work.



    FastFlush Cleaning System – Cleans the unit four times faster using only half the water.



    On-Board Toolbox – End frustration and save time by never again searching for tips, filters, and tools.



    Ready to Spray – Save setup time, thanks to the 100 ft of hose and gun that’s already attached and ready to use.


    Standard INCLUDES:

  • Flex Plus Gun
  • LTX425 SwitchTip and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose


  • ProContractor INCLUDES:

  • Flex Plus Gun
  • LTX425 SwitchTip and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 50 ft (6.4 mm x 15 m) BlueMax II Airless Hose


  • SPECIFICATIONS:

  • MAX TIP SIZE: .033
  • MAX GPM (LPM): 1.10 (4.1)
  • MAX PSI (BAR): 3300 (227)
  • MOTOR: 2.2 hp Brushless DC
  • TexSpray Mark V
    16W905 Standard
    16W906 ProContractor
    16X947 IronMan

    TexSpray

    Electric Airless Texture Sprayer
    Graco’s original electric airless texture sprayer, with 20 percent more productivity than the Mark IV

    The Graco TexSpray Mark V is built to deliver a higher flow rate that lets you get the job done faster. It features 20 percent more productivity than the Mark IV and comes with an upgraded Heavy-Duty Texture Gun. It can accommodate a larger tip size, and has the power to spray skim coat in a Level 5 finish, drywall mud in an orange peel, splatter or knockdown finish or even the wide range of primers and paint.

    FEATURES & SPECIFICATIONS



    The Standard Series:

    MaxPower Brushless DC Motor – Never change brushes with this maintenance-free, totally enclosed motor.



    Advantage Drive System – Runs quiet and has a lifetime guarantee.



    SmartControl 3.0 Pressure Control – Delivers consistent spray fan without pressure fluctuations at all spraying pressures, and includes ProGuard technology.



    Endurance Pump with Max Flo+ – Amazingly durable and easy-to-service design means less downtime on the job.



    Rugged Cart Design – Chrome over steel makes this durable cart last for years.



    Ceramic and Stainless Steel Ball Sets – Provides maximum versatility no matter what you’re spraying.



    Easy Out Pump Filter – Spill less material when removing the filter element.



    Heavy-Duty Prime Valve – Maintenance-free design withstands high pressure dumping.



    The ProContractor Series:

    QuikReel – Deploy and rewind up to 300 ft of hose in seconds without twists or coils.



    LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.



    WatchDog Pump Protection System – Saves the pump from damage when paint or texture material runs out or a hose breaks.



    ProConnect 2 Pump Removal System – Change out the pump using no tools in seconds resulting in quickly getting back to work.



    FastFlush Cleaning System – Cleans the unit four times faster using only half the water.



    On-Board Toolbox – End frustration and save time by never again searching for tips, filters, and tools.



    Ready to Spray – Save setup time, thanks to the 100 ft of hose and gun that’s already attached and ready to use.



    The IronMan Series:

    MaxLife Extreme Duty Pump – Keeps you working longer between repacks.



    ProConnect 2 – Change out the pump using no tools in seconds resulting in quickly getting back to work.



    Roll Cage Frame – Innovative steel design withstands rugged environments and protects critical sprayer components.



    LED Display Bright easy-to-read – LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.



    Flat-Proof Tires – Roll through even the worst jobsite debris without ever going flat.



    FastFlush Cleaning System – Cleans the unit up to 4X faster using only half the water!



    WatchDog – Save the pump from damage when material runs out or if a hose breaks.



    Additional 50 ft of Hose – Gives you the versatility to work farther away from the sprayer.


    Standard INCLUDES:


  • Heavy-Duty Texture Gun
  • LTX425 SwitchTip and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • ProContractor & IronMan INCLUDES:


  • Flex Plus Gun
  • LTX425 SwitchTip and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 50 ft (6.4 mm x 15 m) BlueMax II Airless Hose

  • SPECIFICATIONS:


  • MAX TIP SIZE: .039
  • MAX GPM (LPM): 1.35 (5.1)
  • MAX PSI (BAR): 3300 (227)
  • MOTOR: 2.8 hp Brushless DC
  • TexSpray Mark X 240 Volt
    16W908 Standard
    16X099 ProContractor

    TexSpray

    TexSpray Mark X 240 Volt Power Guide

    Electric Airless Texture Sprayer
    Graco's most powerful electric airless/texture sprayer, with nearly double the output of the Mark V

    The TexSpray Mark X 240 Volt is our most productive electric airless/texture unit. With nearly double the output of the Mark V, it is the sprayer of choice for serious professional contractors who take advantage of the 240 volt power available at a construction site or with a generator. A true powerhouse, it can easily spray skim coat in a Level 5 finish and drywall mud in an orange peel, splatter or knockdown finish. It can even apply the whole range of primers and paints.

    FEATURES & SPECIFICATIONS




    The Standard Series:

    MaxPower Brushless DC Motor – Never change brushes with this maintenance-free, totally enclosed motor.



    Advantage Drive System – Runs quiet and has a lifetime guarantee.



    SmartControl 3.0 Pressure Control – Delivers consistent spray fan without pressure fluctuations at all spraying pressures, and includes ProGuard technology.



    Endurance Pump with Max Flo+ – Amazingly durable and easy-to-service design means less downtime on the job.



    Rugged Cart Design – Chrome over steel makes this durable cart last for years.



    Ceramic and Stainless Steel Ball Sets – Provides maximum versatility no matter what you’re spraying.



    Easy Out Pump Filter – Spill less material when removing the filter element.



    Heavy-Duty Prime Valve – Maintenance-free design withstands high pressure dumping.



    The ProContractor Series:

    QuikReel – Deploy and rewind up to 300 ft of hose in seconds without twists or coils.



    LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.



    WatchDog Pump Protection System – Saves the pump from damage when paint or texture material runs out or a hose breaks.



    ProConnect 2 Pump Removal System – Change out the pump using no tools in seconds resulting in quickly getting back to work.



    FastFlush Cleaning System – Cleans the unit four times faster using only half the water.



    On-Board Toolbox – End frustration and save time by never again searching for tips, filters, and tools.



    Ready to Spray – Save setup time, thanks to the 100 ft of hose and gun that’s already attached and ready to use.


    Standard INCLUDES:

  • Heavy-Duty Inline Gun
  • RAC X 531, 541 SwitchTips and Guard
  • 1/2 in x 50 ft (13 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • ProContractor INCLUDES:

  • Heavy-Duty Inline Gun
  • RAC X 531, 541 SwitchTips and Guard
  • 1/2 in x 100 ft (13 mm x 30 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • SPECIFICATIONS:


  • MAX TIP SIZE: .045
  • MAX GPM (LPM): 2.10 (8.0)
  • MAX PSI (BAR): 3300 (227)
  • MOTOR: 4.0 hp Brushless DC

  • 240VoltConnector.jpg

    Connects to standard 220-240 Volt L6-30 receptacle (3 wire) on most distribution boxes or generators.


    TexSpray 5900 HD
    16W889 Standard
    16X882 ProContractor

    TexSpray

    Gas-Powered Airless/Texture Sprayer
    Reliable performance and versatility in a gas-powered sprayer for just about any texture task

    Built with must-have features that are designed to save you time and money, the TexSpray 5900 HD delivers topnotch performance and versatility. Whether you need to spray skim coat in a Level 5 finish, drywall mud in an orange peel, splatter or knockdown finish or even the wide range of primers, paints and other heavy coatings, this sprayer can handle just about any task you need it to. Doing the job just got easier with Graco!

    FEATURES & SPECIFICATIONS


    The Standard Series:

    MaxPower Brushless DC Motor – Never change brushes with this maintenance-free, totally enclosed motor.



    Advantage Drive System – Runs quiet and has a lifetime guarantee.



    SmartControl 3.0 Pressure Control – Delivers consistent spray fan without pressure fluctuations at all spraying pressures, and includes ProGuard technology.



    Endurance Pump with Max Flo+ – Amazingly durable and easy-to-service design means less downtime on the job.



    Rugged Cart Design – Chrome over steel makes this durable cart last for years.



    Ceramic and Stainless Steel Ball Sets – Provides maximum versatility no matter what you’re spraying.



    Easy Out Pump Filter – Spill less material when removing the filter element.



    Heavy-Duty Prime Valve – Maintenance-free design withstands high pressure dumping.



    The ProContractor Series:

    QuikReel – Deploy and rewind up to 300 ft of hose in seconds without twists or coils.



    LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.



    WatchDog Pump Protection System – Saves the pump from damage when paint or texture material runs out or a hose breaks.



    ProConnect 2 Pump Removal System – Change out the pump using no tools in seconds resulting in quickly getting back to work.



    On-Board Toolbox – End frustration and save time by never again searching for tips, filters, and tools.



    Ready to Spray – Save setup time, thanks to the 100 ft of hose and gun that’s already attached and ready to use.


    Standard INCLUDES:


  • Heavy-Duty Texture Gun
  • LTX531, LTX427 SwitchTips and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • ProContractor INCLUDES:


  • Heavy-Duty Texture Gun
  • LTX531, LTX427 SwitchTips and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 50 ft (6.4 mm x 15 m) BlueMax II Airless Hose

  • SPECIFICATIONS:


  • MAX TIP SIZE: .043
  • MAX GPM (LPM): 1.6 (6.0)
  • MAX PSI (BAR): 3300 (227)
  • ENGINE CC (HP): Honda 160 (5.5)

  • TexSpray 7900 HD
    16W890 Standard
    16X888 ProContractor
    16X949 IronMan

    TexSpray

    Gas-Powered Airless/Texture Sprayer
    The ideal gas-powered texture sprayer for high production contractors who demand uninterrupted performance

    The TexSpray 7900 HD delivers outstanding performance and a flow rate that lets you spray the most square footage per day, saving you time and money. Whether you need to spray skim coat in a Level 5 finish, drywall mud in an orange peel, splatter or knockdown finish or even the wide range of primers, paints and other heavy coatings, this sprayer can do it all!

    FEATURES & SPECIFICATIONS


    The Standard Series:

    Advantage Drive System – Runs quiet and has a lifetime guarantee.



    SmartControl 3.0 Pressure Control – Delivers consistent spray fan without pressure fluctuations at all spraying pressures.



    Endurance Pump with Max Flo+ – Submerged foot valve easily handles the thickest materials.



    Ceramic and Stainless Steel Ball – Sets Provides maximum versatility no matter what you’re spraying.



    Honda Engine – Delivers maximum performance and contractor preferred reliability.



    Rugged Cart Design – Chrome over steel makes this durable cart last for years.



    Easy Out Pump Filter – Less mess when changing or cleaning the filter.



    Heavy-Duty Prime Valve – Maintenance-free design withstands high pressure dumping.



    The ProContractor Series sprayer has all the features of the Standard Series, plus:

    QuikReel – Deploy and rewind up to 300 feet of hose in seconds without twists, kinks or coils.



    Ready To Spray – A total of 100 feet of hose and gun already installed.



    ProConnect 2 – Change out the pump using no tools in seconds resulting in quickly getting back to work.



    LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.



    WatchDog – Save the pump from damage when material runs out or a hose breaks.



    On-Board Toolbox – End frustration and save time by never again searching for tips, filters, and tools.

    The IronMan Series sprayer has all the features of the Standard Series, plus:



    MaxLife Extreme Duty Pump – Keeps you working longer between repacks.



    ProConnect 2 – Change out the pump using no tools in seconds resulting in quickly getting back to work.



    Roll Cage Frame – Innovative steel design withstands rugged environments and protects critical sprayer components.



    LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.



    Flat-Proof Tires – Roll through even the worst jobsite debris without ever going flat.



    WatchDog – Save the pump from damage when material runs out or if a hose breaks.



    Additional 50 ft of Hose – Gives you the versatility to work farther away from the sprayer.


  • Standard INCLUDES:

  • Heavy-Duty Texture Gun
  • LTX531, LTX427 SwitchTips and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • ProContractor & IronMan INCLUDES:

  • Heavy-Duty Texture Gun
  • LTX531, LTX427 SwitchTips and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 50 ft (6.4 mm x 15 m) BlueMax II Airless Hose

  • SPECIFICATIONS:


  • MAX TIP SIZE: .048
  • MAX GPM (LPM): 2.2 (8.3)
  • MAX PSI (BAR): 3300 (227)
  • ENGINE CC (HP): Honda 200 (6.5)

  • TexSpray DutyMax GH 230DI Convertible
    24W943 Standard
    24W944 Standard Electric Motor
    24W945 Standard Electric Motor(CSA)
    24W962 ProContractor
    24W963 ProContractor Electric Motor
    24W964 ProContractor Electric Motor(CSA)

    TexSpray

    Gas Hydraulic Airless Sprayer
    Versatile sprayer for the professional contractor who is looking for workhorse hydraulic performance

    When your job requires maximum productivity and versatility, turn to the all new TexSpray™ DutyMax™ GH™ 230DI sprayer to get the job done—fast! Equipped with a long stroke, direct immersion pump, this hydraulic workhorse is built for the biggest, most demanding jobs and materials. Built for you in both Standard and ProContractor Series.

    FEATURES & SPECIFICATIONS



    24W943 Standard,
    24W944 Standard Electric Motor Kit (Non CSA),
    24W945 Standard Electric Motor Kit(CSA) Series:

    High-Efficiency Hydraulic Motor—Graco's hydraulic pump delivers rock-solid performance time after time and keeps you up and running



    Endurance™ Pump with Max Flo™—Graco's Endurance Pump is the most rugged and reliable pump on the market today



    High-Capacity Cooling System—A hydraulic pump is only as good as its cooling system, and Graco's innovative design allows the pump to run cooler and more efficiently



    Honda® Engine—Compact, lightweight, and powerful, Honda engines are reliable, technologically advanced, and easy to start



    Heavy-Duty Prime Valve—Maintenance-free design withstands high-pressure dumping



    Indoor and Outdoor Use—Quickly swap the gas engine for an electric motor in seconds, without tools



    Easy Out™ Pump Filter—The Easy Out pump filter is designed to filter from the inside out so filters won't get stuck or collapse when filled with dirt or debris



    Rugged, Durable Cart Design—With a Graco sprayer, it's not just the mechanical parts that are built to last. Our carts are built to deliver years of performance



    24W962 ProContractor,
    24W963 ProContractor Electric Motor Kit(Non CSA),
    24W964 ProContractor Electric Motor Kit(CSA) Series:

    Extreme-Duty MaxLife® Pump—Built for the most demanding jobs and delivers unmatched durability and life



    ProConnect™—Graco's ProConnect Pump Removal and Installation System makes it easy and fast to replace the pump



    QuikReel™—With the integrated QuikReel, you can deploy and rewind up to 300 feet of hose in seconds, letting you put the sprayer where you want it and the gun where you need it



    Heavy-Duty Rock Catcher—Internal design stands up to hard impacts and provides unmatched pump protection



    Standard INCLUDES:

  • Heavy-Duty Texture Gun
  • LTX531, LTX427 SwitchTips and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • ProContractor INCLUDES:

  • Heavy-Duty Texture Gun
  • LTX531, LTX427 SwitchTips and Guard
  • 3/8 in x 100 ft (9.5 mm x 30 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • SPECIFICATIONS:


    With Gas Engine:

  • MAX TIP SIZE: .053
  • MAX GPM (LPM): 2.35 (8.9)
  • MAX PSI (BAR): 3300 (227)
  • ENGINE CC (HP): 200 (6.5)

  • With Electric Engine:

  • MAX TIP SIZE: .031
  • MAX GPM (LPM): 1.10 (4.2)

  • TexSpray DutyMax DH 230DI Convertible
    17G591 Standard
    17G592 ProContractor DI

    TexSpray

    Diesel Hydraulic Airless Sprayer
    The TexSpray DutyMax DH 230DI is a versatile airless sprayer for the professional contractor who is looking for a portable solution.

    When your job requires maximum productivity, portability, and versatility, turn to the all new TexSpray™ DutyMax™ DH 230DI sprayer to get the job done—fast! Equipped with a long stroke, direct immersion pump, this hydraulic workhorse is built for the biggest, most demanding jobs and materials. And with the ability to change out the pump lower and convert from diesel to electric or gas power without tools, you can be assured that you have the most versatile sprayer on the market today..

    FEATURES & SPECIFICATIONS

    Endurance™ Direct Immersion Pump with MaxLife®—Built for the most demanding jobs and delivers unmatched durability and life



    ProConnect™—Graco's ProConnect Pump Removal and Installation System makes it easy and fast to replace the pump



    QuikReel™—With the integrated QuikReel, you can deploy and rewind up to 300 feet of hose in seconds, letting you put the sprayer where you want it and the gun where you need it



    Crushproof Rock Catcher—Internal design stands up to hard impacts and provides unmatched pump protection



    High-Efficiency Hydraulic Motor—Graco's hydraulic pump delivers rock-solid performance time after time and keeps you up and running



    High-Capacity Cooling System—A hydraulic pump is only as good as its cooling system, and Graco's innovative design allows the pump to run cooler and more efficiently



    349 cc (6.1 hp) Kohler® Diesel Engine—Direct injection delivers increased power and lower fuel consumption



    Indoor and Outdoor Use—Quickly swap the diesel engine for an electric motor in seconds, without tools



    Easy Out™ Pump Filter—The Easy Out pump filter is designed to filter from the inside out so filters won't get stuck or collapse when filled with dirt or debris



    Rugged, Durable Cart Design—With a Graco sprayer, it's not just the mechanical parts that are built to last



    Ready to Spray—Assembled and ready to use right out of the box


    UNIT INCLUDES:



  • Heavy-Duty Blue Texture Gun
  • LTX531, LTX427 SwitchTips and Guard
  • 3/8 in x 100 ft (9.5 mm x 30.4 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • TexSpray DutyMax GH 300DI Convertible
    24W967 Standard
    24W968 ProContractor

    TexSpray

    Gas Hydraulic Airless Sprayer
    One of the most powerful hydraulic sprayers for high production contractors

    When you need maximum performance, turn to the all new TexSpray™ DutyMax™ GH™ 300DI sprayer to get the job done—fast! Equipped with a long stroke, direct immersion pump, this hydraulic workhorse is built for the biggest, most demanding jobs and materials. Built for you in both Standard and ProContractor Series.

    FEATURES & SPECIFICATIONS




    Standard Series:

    High-Efficiency Hydraulic Motor—Graco's hydraulic pump delivers rock-solid performance time after time and keeps you up and running

    Endurance™ Pump with Max Flo™—Graco's Endurance Pump is the most rugged and reliable pump on the market today

    High-Capacity Cooling System—A hydraulic pump is only as good as its cooling system, and Graco's innovative design allows the pump to run cooler and more efficiently

    Honda® Engine—Compact, lightweight, and powerful, Honda engines are reliable, technologically advanced, and easy to start

    Heavy-Duty Prime Valve—Maintenance-free design withstands high-pressure dumping

    Indoor and Outdoor Use—Quickly swap the gas engine for an electric motor in seconds, without tools

    Easy Out™ Pump Filter—The Easy Out pump filter is designed to filter from the inside out so filters won't get stuck or collapse when filled with dirt or debris

    Rugged, Durable Cart Design—With a Graco sprayer, it's not just the mechanical parts that are built to last. Our carts are built to deliver years of performance

    ProContractor Series:

    Extreme-Duty MaxLife® Pump—Built for the most demanding jobs and delivers unmatched durability and life

    ProConnect™—Graco's ProConnect Pump Removal and Installation System makes it easy and fast to replace the pump

    QuikReel™—With the integrated QuikReel, you can deploy and rewind up to 300 feet of hose in seconds, letting you put the sprayer where you want it and the gun where you need it

    Heavy-Duty Rock Catcher—Internal design stands up to hard impacts and provides unmatched pump protection

    Standard INCLUDES:

  • Heavy-Duty Inline Gun
  • LTX643, WR1239 SwitchTips and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • ProContractor INCLUDES:

  • Heavy-Duty Inline Gun
  • LTX643, WR1239 SwitchTips and Guard
  • 3/8 in x 100 ft (9.5 mm x 30 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

  • SPECIFICATIONS:


    With Gas Engine:

  • MAX TIP SIZE: .057
  • MAX GPM (LPM): 3.0 (11.4)
  • MAX PSI (BAR): 3300 (227)
  • ENGINE CC (HP): 270 (9.0)

  • Top20PCETop20FPE
    Accepted Payment Types Secured With SSL
    EnDiSys on Facebook EnDiSys on LinkedIN EnDiSys on YouTube EnDiSys on Twitter

    Main Office: 14329 Northdale
    Blvd. Rogers, MN 55374
    Phone: (763) 428-5075 
    Fax: (763) 428-5078

    Illinois Office: 120 Industrial
    Drive Gilberts, IL 60136
    Phone: (847) 400-4615

    Michigan Office: 8408 Saratoga Drive
    Lambertville, MI 48144
    Phone: (313) 597-5043

    Texas Office: 7105 Hunt Lane
    Rockwall, TX 75087
    Phone: (430) 302-2069